-
變?nèi)荻O管的構造原理
變?nèi)荻O管(Varactor Diodes)又稱“可變電抗二極管”,是利用pN結反偏時結電容大小隨外加電壓而變化的特性制成的。反偏電壓增大時結電容減小、反之結電容增大,變?nèi)荻O管的電容量一般較小,其值為幾十皮法到幾百皮法,區容與小電容之比約為5:1。
2021-11-11
變?nèi)荻O管
-
通過節省時間和成本的創新技術降低電源中的EMI
隨著電子系統變得越來越密集并且互連程度越來越高,降低電磁干擾 (EMI) 的影響日益成為一個關鍵的系統設計考慮因素。本白皮書分析了開關模式電源中的 EMI,并提供了一些可幫助設計人員快速且輕松地通過業界通用 EMI 測試的技術示例。
2021-11-10
創新技術 電源 EMI
-
數字隔離芯片的PD參數出廠測試為什么是必要的?
近年來,數字隔離芯片在工業、醫療、汽車等領域越來越多的被工程師所信賴。數字隔離芯片因為體積小,集成度高,功耗低,通訊速度高等顯著的特點,正在逐步替代傳統的光耦器件。數字隔離芯片是系統中涉及到高壓安全的核心器件,因此出廠的時候需要經過嚴格篩選。
2021-10-21
數字隔離芯片 PD參數 出廠測試
-
抑制開關穩壓器EMI:不用濾波電路,還有什么好方法?
對于要實現電池供電或分布式電源系統的設計人員來說,使用低壓降 (LDO)穩壓器還是開關穩壓器往往是個問題。開關穩壓器的效率相對更高,可謂是一項優勢,尤其是對于電池供電產品。然而,電源中快速開關晶體管產生的EMI才是關鍵權衡要素——在高度集成的緊湊型設計中,EMI可能會衍生成更嚴重的問題。
2021-10-19
開關穩壓器 EMI 濾波電路
-
汽車電子非隔離型變換器傳導與輻射EMI的產生,傳播與抑制
汽車電子行業中,基于安全性的考慮,對EMI的要求極為嚴格,對于汽車電子工程師也提出了挑戰。對各種EMI問題的建模分析,會極為有效的幫助我們減小EMI。本文就將和大家探討下非隔離型變換器(如Buck,Boost和Buck-Boost)產生EMI的機理,模型和抑制方法。
2021-10-15
汽車電子 變換器 EMI
-
輸出帶長線負載的傳導EMI的分析與改善
在汽車電子的許多應用中,負載需要通過一條較長的輸出線連接到主板上。如圖1所示,典型應用有Class-D,LED,USB充電器等。往往此時的傳導EMI會更加嚴重,這次分享就是針對這一問題來分析和進行改善。
2021-10-15
長線負載 傳導EMI 汽車電子
-
選擇支持汽車應用的可靠電容器
想要為當今汽車電子產品選擇性能可靠的電容器,需要仔細分析各類參數。首先,必須了解各種電容技術的性能特點。其次,應考慮汽車環境和特定應用,從而找到成效比優異的可靠解決方案。本文將探討四種主要電介質電容器的特點:鉭電解、鋁電解、薄膜和陶瓷。此外,還將說明汽車環境,并列出汽車應用的...
2021-10-15
汽車應用 電容器
-
LDO噪聲揭秘
此應用報告說明了 LDO 的噪聲與 PSRR 之間的差異,還說明了 LDO 數據表中噪聲的不同規定方式以及在應用中應采用的噪聲規格,最后說明了降低 LDO 噪聲的方法。
2021-10-15
LDO 噪聲
-
晶振為什么不能放置在PCB邊緣?
某行車記錄儀,測試的時候要加一個外接適配器,在機器上電運行測試時發現超標,具體頻點是84MHZ、144MH、168MHZ,需要分析其輻射超標產生的原因,并給出相應的對策。輻射測試數據如下:
2021-09-09
晶振 PCB邊緣
- 兆易創新GD32F30x STL軟件測試庫獲得德國萊茵TüV IEC 61508功能安全認證
- 芯科科技第三代無線開發平臺引領物聯網發展
- MSO 4B 示波器為工程師帶來更多臺式功率分析工具
- 艾為電子推出新一代高線性度GNSS低噪聲放大器——AW15745DNR
- 瑞薩發布四通道主站IC和傳感器信號調節器, 以推動不斷增長的IO-Link市場
- e絡盟現貨供應 Abracon 新推出的 AOTA 系列微型鑄型電感器
- 加賀富儀艾電子推出支持Wi-Fi 6和藍牙的無線局域網/藍牙組合模塊
- 讓汽車LED照明無死角,LED驅動的全面進化
- 開關模式電源問題分析及其糾正措施:晶體管時序和自舉電容問題
- 熱電偶的測溫原理
- 【泰克先進半導體實驗室】 遠山半導體發布新一代高壓氮化鎵功率器件
- ADALM2000實驗:變壓器
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall